How to Fix Garage Door Cable – A Step-by-Step DIY Guide

How to Fix Garage Door Cable - lock and garage

If you’re a homeowner, chances are you’ve experienced problems with your garage door cable at one point or another. A garage door cable is an essential part of your garage door system, responsible for supporting the weight of the door and ensuring it opens and closes smoothly.

When your garage door cable breaks or becomes damaged, it can cause your garage door to malfunction, leaving your vehicle and other belongings unprotected. While hiring a professional garage door technician to fix the issue can be expensive, you can save money by fixing it yourself.

In this article, we’ll provide you with a step-by-step DIY guide on how to fix garage door cables. We’ll also provide you with tips and tricks to make the process easier and more efficient.

Let’s get started!

Step 1: Gather the Necessary Tools and Materials

Before you start fixing your garage door cable, you’ll need to gather the necessary tools and materials. Here’s what you’ll need:

  • Replacement cable
  • Safety glasses
  • Gloves
  • Adjustable wrench
  • Vice grips
  • Flathead screwdriver
  • Pliers
  • Ladder
  • Clamps
  • Hammer

Step 2: Disconnect the Garage Door Opener

To ensure your safety while fixing the garage door cable, you’ll need to disconnect the garage door opener from the door. This will prevent the door from opening or closing accidentally while you’re working on it.

To disconnect the garage door opener, locate the emergency release cord on the opener track, and pull it down. This will disconnect the opener from the door.

Step 3: Release the Tension on the Cable

Next, you’ll need to release the tension on the cable. Start by clamping a pair of vice grips onto the track just below the bottom roller. This will prevent the door from moving while you release the tension on the cable.

Using an adjustable wrench, loosen the nuts on the bottom brackets on both sides of the door. Then, use a pair of pliers to release the tension on the cable by loosening the cable from the bracket.

Step 4: Remove the Old Cable

Once you’ve released the tension on the cable, you can remove the old cable. Start by removing the cable from the drum, which is located at the top of the door. Use a flathead screwdriver to pry off the drum, and then slide the cable off.

Next, remove the cable from the bottom bracket. Use pliers to remove the cable from the bracket, and then pull the cable out of the bracket.

Step 5: Install the New Cable

Now that you’ve removed the old cable, it’s time to install the new one. Start by sliding the new cable through the bottom bracket and then through the drum. Use a hammer to tap the drum back into place, making sure the cable is snug.

Next, thread the cable through the spring and attach it to the cable drum. Make sure the cable is tight and secure.

Step 6: Reattach the Bottom Bracket

Once the new cable is installed, it’s time to reattach the bottom bracket. Start by threading the cable back through the bracket and tightening the nuts. Use pliers to tighten the cable securely in place.

Step 7: Reconnect the Garage Door Opener

After the new cable is installed and the bottom bracket is reattached, you can reconnect the garage door opener. Simply pull the emergency release cord down again to reconnect the opener to the door.

Step 8: Test the Garage Door

Finally, test the garage door to ensure that it’s functioning properly. Open and close the door a few times to make sure it’s moving smoothly and without any issues.

How to Fix Garage Door Cable - lock and garage

Tips and Tricks:

  • Always wear safety glasses and gloves when working on your garage door cable.
  • Make sure to use the correct size replacement cable for your garage door.
  • If you’re not comfortable working on your garage door cable, don’t hesitate to call a professional technician.
  • Regular maintenance of your garage door can help prevent cable damage and other issues.

Fix Your Garage Door Cable with Confidence and Save Money

Fixing your garage door cable is a task that can be accomplished with the right tools, materials, and knowledge. By following the step-by-step instructions and tips provided in this DIY guide, you can fix your garage door cable like a pro and save money in the process.

Remember to always prioritize your safety when working on your garage door, and don’t hesitate to call a professional if you’re unsure or uncomfortable with the task at hand. With a little bit of effort and know-how, you can ensure that your garage door is functioning properly and keeping your vehicle and other belongings safe and secure.

related blogs